Length [mm]: 155,2 mm ; Manufacturer Restriction: ATE ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; Thickness/Strength 1 [mm]: 18,8 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Wear Warning Contact: not prepared for wear indicator ; Fitting Position: Front Axle ; ArticleState: Normal
Width 1 [mm]: 155,1 mm ; Height 1 [mm]: 64,7 mm ; Thickness/Strength 1 [mm]: 18,5 mm ; Width 2 [mm]: 155,1 mm ; Height 2 [mm]: 58,3 mm ; Thickness/Strength 2 [mm]: 18,5 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Brake System: ATE ; Inspection Tag: E1 90R-011403/1369 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Weight [kg]: 0,32 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 86,8 mm ; Width [mm]: 53 mm ; Thickness [mm]: 16,6 mm ; Fitting Position: Rear Axle ; Weight [kg]: 0,9 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 121 mm ; Weight [kg]: 0,38 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 137 ; Weight [kg]: 0,2 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Weight [kg]: 0,9 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 155,2 mm ; Width [mm]: 57,5 mm ; Thickness [mm]: 17,8 mm ; Fitting Position: Front Axle ; Weight [kg]: 1,71 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Height 1 [mm]: 53 mm ; Brake System: TRW ; Width 1 [mm]: 86,8 mm ; Thickness/Strength 1 [mm]: 17,1 mm ; Number of Springs: 4 ; Number of pads: 4 ; Number of threaded bolts: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
Height 1 [mm]: 57,5 mm ; Height 2 [mm]: 64,4 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,2 mm ; Thickness/Strength 1 [mm]: 18,3 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 55.9
Number of Teeth: 141 ; Length [mm]: 1343 mm ; Width [mm]: 25,4 mm ; Pulleys contained: 2 ; ArticleState: Normal ; Technical Information: Für Motoren mit optimiertem Steuertrieb. Kennzeichen:
Zahnriemen-Antriebsrad mit Bohrung auf der dem Motor
zugewandten Seite. Siehe Service Information.
Number of Teeth: 137 ; Length [mm]: 1305 mm ; Width [mm]: 25 mm ; Pulleys contained: 2 ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987948206
Number of Teeth: 137 ; Length [mm]: 1305 mm ; Width [mm]: 25 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949614
Number of Teeth: 141 ; Length [mm]: 1343 mm ; Width [mm]: 25,4 mm ; Pulleys contained: 2 ; ArticleState: Normal ; Technical Information: Für Motoren mit nicht optimiertem Steuertrieb. Kennzeichen:
Zahnriemen-Antriebsrad ohne Bohrung auf der dem Motor
zugewandten Seite. Siehe Service Information.
Number of Teeth: 141 ; Length [mm]: 1343 mm ; Width [mm]: 25,4 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949666
Diameter [mm]: 228,6 mm ; for article number: S 61 524 ; Width [mm]: 41,5 mm ; Brake System: TRW ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Number of Teeth: 137 ; Length [mm]: 1035 mm ; Width [mm]: 25 mm ; Pulleys contained: 2 ; Belts: with rounded tooth profile ; Number of belts: 1 ; ArticleState: Normal
Number of Teeth: 137 ; Width [mm]: 25 mm ; Weight [kg]: 0,216 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal
Diameter [mm]: 60 mm ; Width [mm]: 29 mm ; Tensioner Pulley Actuation: Automatic ; for article number: KD015/KD016 ; ArticleState: only supplied in parts list
Width [mm]: 25 mm ; Number of Teeth: 137 ; Weight [kg]: 0,9 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 155,2 mm ; Fitting Position: Front Axle ; Height [mm]: 64,7 mm ; Height [mm]: 57,7 mm ; Thickness [mm]: 18,8 mm ; Thickness [mm]: 18,3 mm ; Weight [kg]: 1,76 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Outer diameter [mm]: 60 mm ; Material: Plastic ; Weight [kg]: 0,29 kg ; Observe service information: ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 137 ; Weight [kg]: 0,14 kg ; Belts: with rounded tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 88 mm ; Supplementary Article/Info 2: with screws ; Fitting Position: Rear Axle ; Height [mm]: 53 mm ; Thickness [mm]: 16,7 mm ; Weight [kg]: 0,87 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 155,2 mm ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: ATE ; Thickness/Strength 1 [mm]: 18,8 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 18,5 mm ; Length [mm]: 155,2 mm ; Width [mm]: 57,8 mm ; Width [mm]: 64,5 mm ; Height 1 [mm]: 57,8 mm ; Height 2 [mm]: 64,5 mm ; Brake System: ATE ; Supplementary Article/Info 2: with piston clip ; Thickness/Strength 1 [mm]: 18 mm ; WVA Number: 24538 ; WVA Number: 24539 ; Inspection Tag: R90 Homologated ; Weight [kg]: 1,71 kg ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/lfXMN4
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Rear Axle ; Thickness [mm]: 16,6 mm ; Length [mm]: 87,2 mm ; Width [mm]: 53 mm ; Brake System: TRW ; WVA Number: 24765 ; Inspection Tag: R90 Homologated ; Weight [kg]: 0,93 kg ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/Ewc4Ag
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Thickness [mm]: 18,3 mm ; Width [mm]: 155,2 mm ; Height [mm]: 57,7 mm ; Height 1 [mm]: 64,7 mm ; Thickness/Strength 1 [mm]: 18,8 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 155,2 mm ; Height 1 [mm]: 57,5 mm ; Height 2 [mm]: 64,4 mm ; Thickness [mm]: 17,8 mm ; ArticleState: Normal
Thickness [mm]: 18,3 mm ; Thickness [mm]: 18,8 mm ; Width [mm]: 155,2 mm ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; Brake System: Ate ; ArticleState: Normal
Diameter [mm]: 60 mm ; Width [mm]: 29 mm ; Tensioner Pulley Actuation: Automatic ; for article number: KD015/KD016 ; ArticleState: only supplied in parts list
Length [mm]: 155,2 mm ; Manufacturer Restriction: ATE ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; Thickness/Strength 1 [mm]: 18,8 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: on demand
Diameter [mm]: 228,6 mm ; Width [mm]: 41,5 mm ; Brake System: Lucas ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H9000 ; ArticleState: Normal
Diameter [mm]: 228,6 mm ; Width [mm]: 41,5 mm ; Brake System: Lucas ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H9000 ; ArticleState: Normal
Thickness [mm]: 16,7 mm ; Width [mm]: 87 mm ; Weight [kg]: 0,7 kg ; Height 1 [mm]: 52,8 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 4 identical pads with top springs
Diameter [mm]: 228 mm ; Width [mm]: 40 mm ; for article number: 07420 ; Brake System: TRW ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Height 1 [mm]: 57,5 mm ; Height 2 [mm]: 64,4 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,2 mm ; Thickness/Strength 1 [mm]: 18,3 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 55.9
Brake System: ATE ; Thickness/Strength 2 [mm]: 18,3 mm ; Thickness/Strength 1 [mm]: 18,8 mm ; Height 2 [mm]: 64,7 mm ; Width [mm]: 155,1 mm ; Height 1 [mm]: 57,8 mm ; for article number: 05P1351 ; ArticleState: Normal
Supplementary Article/Info 2: with handbrake lever ; for article number: 07420 ; Diameter [mm]: 228 mm ; Width [mm]: 40 mm ; Brake System: TRW ; ArticleState: Normal
Length [mm]: 123 mm ; Width [mm]: 106 mm ; Outlet Ø [mm]: 10 mm ; Height [mm]: 122 mm ; Supplementary Article/Supplementary Info: with seal ; ArticleState: Normal
Construction year from: 05.2008 ; Fitting Position: Rear Axle ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with anti-squeak plate ; Part number of recommended accessories: 1987474435 ; Thickness [mm]: 16,6 mm ; Width [mm]: 87,1 mm ; Height [mm]: 52,9 mm ; ArticleState: Normal
Engine Code: 9HF ; Construction year from: 07.2010 ; Fitting Position: Front Axle ; Supplementary Article/Info 2: with mounting manual ; Supplementary Article/Info 2: with anti-squeak plate ; Part number of recommended accessories: 1987474417 ; Thickness [mm]: 18,8 mm ; Width [mm]: 155,2 mm ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; ArticleState: Normal
ArticleState: No longer supplied by manufacturer ; Technical Information: High Tenacity-Riemen (HT-Riemen)
aus speziellen teflonbeschichteten PTFE-Gewebe
Fitting Position: Rear Axle ; Diameter [mm]: 229 mm ; Width [mm]: 42 mm ; Supplementary Article/Supplementary Info: without spring ; Supplementary Article/Supplementary Info: with lever ; Brake System: Lucas Girling ; ArticleState: Normal
Number of Teeth: 137 ; Length [mm]: 1305 mm ; Width [mm]: 25 mm ; Driven Units: Driven unit: camshaft ; Number of belts: 1 ; Pulleys contained: 2 ; ArticleState: Normal
Diameter [mm]: 228,6 mm ; Width [mm]: 41,5 mm ; Brake System: Lucas ; Supplementary Article/Info 2: with handbrake lever ; Weight [kg]: 1,841 kg ; Packaging length [cm]: 21,5 cm ; Packaging width [cm]: 18,7 cm ; Packaging height [cm]: 9,7 cm ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 155,2 mm ; Height 1 [mm]: 57,5 mm ; Height 2 [mm]: 64,4 mm ; Thickness [mm]: 17,8 mm ; ArticleState: Normal
Pulleys contained: 2 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Number of Teeth: 137 ; Width [mm]: 25 mm ; Heat resistant: ; Packaging length [cm]: 20,8 cm ; Packaging width [cm]: 3,2 cm ; Packaging height [cm]: 23 cm ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness/Strength 1 [mm]: 18 mm ; Thickness/Strength 2 [mm]: 18,5 mm ; Length [mm]: 155,2 mm ; Height 1 [mm]: 57,8 mm ; Height 2 [mm]: 64,5 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: Ate ; ArticleState: Normal
Inner Br. Drum Diam. [mm]: 228,6 mm ; Width [mm]: 42 mm ; Brake System: LUCAS ; Weight [kg]: 1,959 kg ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Front Axle ; Width [mm]: 155,3 mm ; Height 1 [mm]: 64,7 mm ; Height 2 [mm]: 57,7 mm ; Thickness/Strength 1 [mm]: 18,8 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Wear Warning Contact: not prepared for wear indicator ; WVA Number: 24538 ; Brake System: Teves ; Part number of recommended accessories: 82032000 ; ArticleState: Normal
Engine Code: DV6ATED4 ; Driven Units: Driven unit: camshaft ; Number of Teeth: 137 ; Width [mm]: 25 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Fitting Position: Front Axle ; Brake System: Ate ; Length [mm]: 155,2 mm ; Height 1 [mm]: 57,5 mm ; Height 2 [mm]: 64,4 mm ; Thickness/Strength 1 [mm]: 17,8 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Info 2: with anti-squeak plate ; ArticleState: Normal
Number of Teeth: 137 ; Width [mm]: 25 mm ; Belts: with rounded tooth profile ; Part number of the recommended special tools: VKN 1005 ; ArticleState: Normal ; General Information: Spannrollensatz
Number of Teeth: 137 ; Width [mm]: 25 mm ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: SKF-Empfehlung: Spannrollensatz
Number of Teeth 1: 137 ; Number of belts: 1 ; Weight [g]: 787 g ; Width 1 [mm]: 25 mm ; ArticleState: Normal ; Technical Information: Anzahl der Spannrollen:2
Fitting Position: Front Axle ; Length [mm]: 155,2 mm ; Thickness [mm]: 18,8 mm ; Height [mm]: 64,7 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Height 2 [mm]: 57,7 mm ; Weight [kg]: 1,793 kg ; ArticleState: Normal
Width [mm]: 155,2 mm ; Fitting Position: Front Axle ; Height [mm]: 64,7 mm ; Height [mm]: 57,7 mm ; Thickness [mm]: 18,8 mm ; Thickness [mm]: 18,3 mm ; Weight [kg]: 1,76 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Outer diameter [mm]: 60 mm ; Material: Plastic ; Weight [kg]: 0,29 kg ; Observe service information: ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 137 ; Weight [kg]: 0,5 kg ; Belts: with rounded tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 137 ; Weight [kg]: 0,9 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 88 mm ; Supplementary Article/Info 2: with screws ; Fitting Position: Rear Axle ; Height [mm]: 53 mm ; Thickness [mm]: 16,7 mm ; Weight [kg]: 0,87 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Diameter [mm]: 228,6 mm ; Width [mm]: 41,5 mm ; Brake System: Lucas ; Supplementary Article/Info 2: with handbrake lever ; Weight [kg]: 2,092 kg ; Packaging length [cm]: 21,5 cm ; Packaging width [cm]: 18,7 cm ; Packaging height [cm]: 9,7 cm ; Technical Information Number: 98101 0529 0 4 ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 18,8 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: without accessories ; Number of pads: 4 ; ArticleState: Normal
Number of pads: 4 ; Fitting Position: Rear Axle ; Thickness [mm]: 16,6 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
for article number: 629.0648 ; Diameter [mm]: 228,6 mm ; Width [mm]: 41,5 mm ; Brake System: TRW ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness/Strength 1 [mm]: 18,8 mm ; Height 2 [mm]: 64,7 mm ; Thickness/Strength 2 [mm]: 18,3 mm ; Width [mm]: 155,1 mm ; Brake System: ATE ; Height 1 [mm]: 57,8 mm ; for article number: 626.1351 ; ArticleState: Normal
Number of Teeth: 137 ; Width [mm]: 25 mm ; Weight [kg]: 0,216 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal ; General Information: Contitech CT1092
Number of Teeth: 137 ; Width [mm]: 25 mm ; Weight [kg]: 0,5 kg ; Required quantity: 1 ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: Swag 64924367
Number of Teeth: 137 ; Width [mm]: 25 mm ; Weight [kg]: 0,751 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1092K1
Fitting Position: Front Axle ; Manufacturer Restriction: ATE ; Length [mm]: 155,2 mm ; Width 1 [mm]: 57,5 mm ; Width 2 [mm]: 64,4 mm ; Thickness/Strength 1 [mm]: 17,4 mm ; Thickness/Strength 2 [mm]: 18 mm ; Weight [kg]: 1,91 kg ; ArticleState: Normal